Informations
Product description
The EverSolo C10 is a dedicated high-end master clock designed to synchronize digital audio components—such as streaming transports, CD transports, and DACs—to a single, ultra-precise timing reference. It has no audio inputs or outputs and does not process music signals directly; instead, it sits alongside your digital gear to eliminate timing discrepancies (jitter) between separate devices.
How It Works & Key Architecture
When you use a separate digital transport and DAC, each relies on its own internal crystal oscillator that drifts slightly differently. The C10 replaces those independent clocks with one shared, higher-grade timing source:
-
SC-Cut OCXO Oscillator: At its core is a custom Oven-Controlled Crystal Oscillator (OCXO) built around a doubly rotated SC-cut (stress-compensated) quartz crystal. By housing the crystal inside a temperature-controlled oven, the C10 minimizes frequency drift caused by ambient temperature changes and mechanical stress.
-
Warm-Up & Telemetry Display: Because the internal oven must reach thermal equilibrium, the C10 takes about 5 minutes after power-on to hit its rated stability. Its 8.8-inch front IPS touchscreen displays real-time warm-up progress, oscillator temperature, operating status, and calibration metrics.
-
Multi-Frequency Compatibility: While 10 MHz is the standard for external audiophile clocks, the C10 offers 10 selectable output frequencies across its four independently buffered BNC outputs:
-
Standard references: 10 MHz, 25 MHz, and 100 MHz
-
44.1 kHz family: 11.2896 MHz, 22.5792 MHz, and 45.1584 MHz
-
48 kHz family: 12.288 MHz, 24.576 MHz, and 49.152 MHz
-
-
1PPS External Calibration: It includes an SMB input for a 1PPS (one pulse per second) signal, allowing it to lock onto an external GPS-disciplined or laboratory atomic time reference.
Specifications
| Specification | Detail |
| Oscillator Type | Custom 10 MHz SC-cut ultra-low-noise OCXO |
| Phase Noise | -115 dBc/Hz (1 Hz), -129 dBc/Hz (10 Hz), -139 dBc/Hz (100 Hz), -145 dBc/Hz (1 kHz) |
| Noise Floor | ≤ -170 dBc/Hz |
| Aging / Temp Drift | Less than 0.002 ppm/day; less than 0.003 ppm (-20°C to +60°C) |
| Outputs | 4 × BNC (Square wave, 1.8 Vrms, 50 Ω) |
| Chassis & Weight | CNC aluminum alloy; 365 × 310 × 88 mm; 5.85 kg (12.9 lbs) |